KERN & SOHN ABJ 320-4NM - Manual (Page 62)

62 ABS-N_ABJ-NM-BA -e-1312
14.2.2 User-defined reference
 Select percent weighing mode, see chpt. 13.2
 Press TARE.
 If necessary, press the navigation buttons ( )
repeatedly until „OPTION“ is displayed.
 Press TARE.
Display, if no reference is stored
Display, if a reference is stored
Set reference
 If necessary, place an empty container on the balance
and tare it by pressing TARE.
 Press MENU twice.
 Press PRINT and current setting will be displayed.
Enter a percentage of your choice via the navigation
buttons, see chpt. 3.1.1 „Numeric input“
 Put a reference weight which corresponds to the entered
percent value.
 Wait for the stability display ( ), then confirm by
pressing TARE.
The display symbol [ ] characterises the percentage
determination with user-defined reference value.
From here on the weight of the sample is displayed in
percentage in terms of the reference weight, see chpt.
14.2.3.
