3 output timing change function – KERN & SOHN ABJ 320-4NM User Manual
Page 80
80
ABS-N_ABJ-NM-BA -e-1312
16.2.3
Output Timing Change function
This function allows to select if the data output shall ensue with stable or instable
weighing value after pressing PRINT.
1. Invoke Data Output menu
Press PRINT for 3 sec. in weighing mode.
2. Select function
Press the navigation buttons ( ) repeatedly
until „APL.PRN“ is displayed.
Confirm with PRINT
Press the navigation buttons ( ) repeatedly until
„PRINT.F“ is displayed.
Confirm with PRINT. The current setting is marked by the
stability display ( ).
with ( )
Instantaneous data output without waiting
until the stability display appears
without ( )
Data output only after stability display
Change using TARE.
3. Return to weighing mode
Press ON/OFF repeatedly or for 3 s.