KERN & SOHN ABJ 320-4NM - Manual (Page 83)

ABS-N_ABJ-NM-BA-e-1312 83
16.3.1 Selection of a standard setting „MODE 1 - MODE 5“
1. Invoke Data Output menu

Press PRINT for 3 sec. in weighing mode.
2. Select function

Press the navigation buttons ( ) repeatedly
until „COMM.SET“ is displayed.
 Confirm with PRINT
 Press the navigation buttons ( ) repeatedly until the
desired mode „MODE 1 - MODE 5“ is displayed. The
current setting is marked by the stability display ( ).
with ( ) on
without ( ) off
 Change using TARE.
3. Return to weighing mode

Press ON/OFF repeatedly or for 3 s.