KERN & SOHN FCB 24K2 - Manual (Page 34)

rE Cr:
The remote control commands s/w/t are sent from the remote control unit to the
balance as ASCII code. After the balance having received the s/w/t commands, it will
send the following data.
Take into account that the following remote control commands must be sent
without a subsequent CR LF.
s Function: Stable weighing value for the weight is sent via the RS232
interface
w Function: Weighing value for the weight (stable or unstable) is sent
via the RS232 interface
t Function: No data are sent, the balance carries out the tare function.
h. Format for stable values for weight/quantity/percentage
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
B
* B B B B B B B B 0 . 0 B g B B CR LF
i. Format in case of fault
1 2 3 4 5 6 7 8 9 10 11 12 13 14
B B B B B B B E r r o
r CR LF
j. Format for unstable values for weight/quantity/percentage
1 2 3 4 5 6 7 8 9 10
11 12 13 14 15
B * B B B B B B B B 0 . 0 B CR LF
Symbols
B * Blank or M
B / 0 /. Blank / weight values / decimal dot, depending on weighing value
g Weight unit / pcs / %
E, o, r ASCII code or “E, o, r”
CR Carriage return symbol
LF Line feed symbol
FCB-BA-e-0911 34