KERN & SOHN EOA 100K-2 - Manual (Page 12)

12 EOA-BA-e-1310
7.2 Weighing
Operation Display
 Start balance by pressing .
 Await zero display
 Place goods onto weighing plate.
Now the weight is displayed, after the standstill control
appears the weighing unit [kg] right-hand in the display.
(example)
If the material to be weighed is heavier than the weighing
range, the display will show [E] (=Overload).
7.3 Taring
Operation Display
 Turn on weighing scale and wait for zero to
be displayed.
 Place the tare vessel (ex. 3kg) on the weighing plate
and press the button.
The balance display goes to [0].
(example)

 Put the sample into the tare vessel.
Weight of sample is indicated.
(example)
 If after finishing the weighing process the
button is pressed again, [0] appears anew in the
display.
The taring process can be repeated any number of times, e.g. when adding several
components for a mixture (adding).
The limit is reached when the whole weighing range is exhausted.
After removing the taring container the total weight is displayed as negative display.
By pressing the
button again, the balance returns to „0“.