KERN & SOHN EOE - Manual (Page 22)

8.3 Hold function (Animal weighing function)
The balance has an integrated animal weighing function (mean value) with which it is
possible to weigh small or domestic animals (minimum weight 1% of max.) precisely,
even when they do not stand still on the weighing platform.
Remark: With to lively movement (strong diplay fluctuation) no mean value
can take place.
Place the animal to be weighed on the weighing platform and press the HOLD key.
A triangle will start to flash on the left hand side of the display, and during this time
the balance will record several values, then calculate and display an mean value.
By pressing the HOLD key again, the weighing machine will be reset to standard
weighing mode.
By pressing the HOLD key again, this function can be repeated as often as desired.
8.4 Plus / Minus Weighings
For instance to control piece-weights, filling process control etc.
Switch the balance on by pressing the ON key, then wait until “0“ is indicated.
Place rated weight on the weighing pan and tare on “0“ by pressing the TARE key.
Remove rated weight.
Place the objects on the weighing pan successively, the balance will show any devia-
tion from the rated weight in “+“ and “-“.
According to the same procedure packages with the same weight, related to a rated
weight, can be produced.
Return to the weighing mode by pressing the TARE key.
8.5 Weight units
Two units are available: “kg“ and “lb“.
The weight unit is chosen by pressing the ”Unit” key.
A lamp to the right of the display signalises the respective unit.
Unit conversion: 1 kg = 2.20462 lb
EOB/EOE/EOS/BOBP-BA-e-0823 22