KERN & SOHN CH 50K100 - Manual (Page 20)

5.7.1 Data-Hold function
 Switch on the balance, keep the HOLD-button pressed until the current setting
„Hx“ (H1 – H6) appears.
 Press ON/OFF/TARE-button repeatedly until the desired setting „H1-H4“ is
displayed.
 Confirm setting with the HOLD button.
 Suspend the material to be weighed
 The weight value is fixed and displayed depending on the setting (H1 – H4) (see
chap. 5.7), represented by the [
] in the upper left.
5.7.2 Animal weighing function
This function is suitable for busy weighing procedures. The result is a mean value
formed by 16 weighing values.
 Switch on balance using the ON/OFF/TARE–button
 Press the HOLD-button and keep it pressed until „H x“ in the display appears
 Press the ON/OFF/TARE-button until „H5“ in the display appears.
 Save the setting by shortly pressing the HOLD-button
 Press the HOLD-button anew
 Upside left in the display a [] starts flashing.
 Suspend a load
 As long as the [] flashes, the weighing values are recorded.
 After that the average weighing value of the recorded weighing values is
recorded.
20 CH-BA-e-1432