KERN & SOHN HFB 600K200 - Manual (Page 25)

HFB-BA-e-1212 25
7. Adjustment
 Switch-off balance and attach a carrying help if necessary.
 Switch-on balance with attached carrying help and during the selftest press the
TARE button. The first function “F0CAP“is displayed.
 Press the TARE button repeatedly until „F9 CAL“ will be displayed.
 Press the ZERO button, „UnlD“ is displayed.
 Unload the balance, wait until the [] symbol above HOLD appears.
 Press the ZERO button, the currently set adjustment weight is displayed.
 In order to change, select the number to be changed by the HOLD button and set
the desired value using the TARE button, the active digit flashes.
 Confirm by the ZERO button, „Load“ will be displayed.
 Attach the adjustment weight and wait until the [] symbol above HOLD appears
 Press the ZERO button.
 After successful adjustment the balance carries out a selftest, then it
automatically returns to weighing mode.
An adjusting error or incorrect adjusting weight will be indicated by the error
message; repeat adjustment procedure