KERN & SOHN MCC 250K100M - Manual (Page 25)

MCC-M-BA-e-1312 25
9 Operation
9.1 Weighing

Start balance by pressing
The balance will carry out a segment test.
The scales are ready for operation as soon as the weight
display for “0.0kg“ has appeared.
However, you can reset the weighing scale to zero by pressing
the key.

Seat person in the centre of the seat pan.
 Fold down the foot rests and place the patient’s feet on the
respective foot rest.

Wait for stability display "STABLE", then read the weighing
result.

Once the weighing process is completed fold up the foot rests.
If a person is heavier than the maximum weighing range, “OL”
(overload) will appear on the display screen.
9.2 Taring
The tare weight of any preloads can be deducted by pressing a button so that the
actual weight of the person is displayed in subsequent weighings.
(example)

Put object (such as towel or padding) on the seating pan.

Press , the zero display appears.
 „NET” is shown at the bottom on the left.
(example)

Seat person in the centre of the seat pan.
Wait until the standstill display „STABLE“ appears, then read
the weighing result.