KERN & SOHN FH - Manual (Page 6)

Sauter GmbH
Ziegelei 1
D-72336 Balingen
E-Mail: [email protected] Tel: +49-[0]7433- 9933-199
Fax: +49-[0]7433-9933-149
Internet: www.kern-sohn.com
Instruction Manual
FH
FH_SI-BA-e-1317 6
FH Adjustment Procedure
1 Start the
instrument
Press ON/OFF The green
light is on
2 Enter the
adjustment
procedure
Directly after pressing
ON/OFF, press PEAK
and PRINT together for
more times and very
short intervals until the
red light is on.
The lower
red light is
on
3 Instrument
Type
Press SET
Directly after pressing
PEAK + PRINT
XXX N is
shown
a (Back to the
normal
mode ???)
(If you are in the
operation mode again,
the instrument has to be
shut off. Start again with
1. Eventually pressing
the buttons faster)
4 Select the
instrument
type
Press ▼▲ The
correspondi
ng value to
the instr.
appears in
the display
5 Save
instrument
type
Press SET
6 Enter the
adjustment
sequence
Press MEMORY The upper
red light is
on
7 Choose the
adjustment
weight
Press UNIT and
with
▼▲ specify the
calibration weight in
Newton (X kg * 9,81)
The weight
is written in
the display
8 Save the
adjustment
weight
Press SET and UNIT
simultaneously
9 Attach the
weight to the
instrument
(by hanging)
Press ZERO The
instrument
changes to
operation
mode.
Adjustment
procedure is
finished