KERN & SOHN FK 1K - Manual

Sauter GmbH
Ziegelei 1
D-72336 Balingen
E-Mail: [email protected] Tel: +49-[0]7433- 9933-199
Fax: +49-[0]7433-9933-149
Internet: www.kern-sohn.com
Instruction Manual
FK
FK-BA-e-1213 1
Thank you for buying a SAUTER force gauge. We hope
you are pleased with your high quality force gauge with its
big functional range. If you have any queries, wishes or
helpful suggestions, do not hesitate to call our service
number.
„Sensor inside“means the measuring cell is inside the
housing.
Table of contents
1. Included in delivery
2. Working conditions
3. Electrical power supply
4. Technical data
5. Operation
6. Backside fixing on a test stand
7. Adjusting procedure
8. Declaration of conformity
9. Warning
1. Included in delivery
- SAUTER FK
- Power cable
- Standard attachments as shown below
Terms:
1.Track Mode= continuous measurement
2. Peak Mode= Capture of the maximum value
In this mode, always the max value is captured during
several consecutive measurements
2. Working Conditions
Temperatures: 10°C up to 30°C
Humidity: 15% up to 80%
dimensions in mm
3. Electrical Power Supply
- Either by batteries (6 x AA batteries ) not rechargeable!
Batteries have to be changed if necessary.
- or current power supply
Power supply:
- Connection by power adapter cable
4. Technical Data
-
Accuracy: ± 0,5 % of Capacity
- Data Sampling Rate: 1.000 Hz
Model
Capacity Resolution
FK 10 10 N 0,005 N
FK 25 25 N 0,01 N
FK 50 50 N 0,02 N
FK 100 100 N 0,05 N
FK 250 250 N 0,1 N
FK 500 500 N 0,2 N
FK 1k 1 000 N 0,5 N
Sensor
Inside
LCD
Force Sensor
(M7 x 0.75mm
thread)
195 mm
83 mm