KERO Neris 3 - Manual (Page 5)

3. Assembly Instructions
Step 2.
Extend left and right dual stringer plates marked
LB and RB
Repeat this step for Stern Assembly and stringer
plates marked LS and RS. Insert single short
stringers into stern dual stringer plates.
Insert low srtingers to bow and stern section than.
The bow and stern sections are ready to be
inserted in to the skin.
4
Step 3.
Unroll the skin. Insert bow and
stern assembly sections into the
skin. Make sure that the stitch line
between deck and hull is positioned
just above the upper stringer.
Frame parts should be inserted
into the skin without visable
distortion!