KERO Neris 3 - Manual (Page 7)

3. Assembly instructions
Step 5.
Take lower stringers lifting them
up. Pull spring latch aside and
center both stringers. Release
latch slowly while strengthening
Stringers. Secure dual stringer
plates by pulling upper and
middle gunwales inside the
kayak. Position stringers in
female and male sleeves and
slowly release the connected
stringers towards the skin.
Step 6.
Position Crossribs ## 2,3,4 on
Keelbar as marked by pointed
arrows.
Secure the Crossribs on dual
stringers plates by lifting the
plates slightly and inserting the
side knob through the keyhole
plate slots
6