KGUARD Security BR1621 - Manual (Page 73)

ENGLISH
Chapter 4: Using the DVR
DVR User’s Manual
73
4.8.2 Events Settings
The Events page allows you to define the type of events for the DVR to issue an alarm.
1
In preview mode, right-click on the mouse to display the Pop-up menu.
2
Select Main Menu > ADVANCED, select the Events tab.
3
Modify the necessary settings.
Menu Item Description
Event Type Select the event type. Options are:
• Disk Full: When HDD is full.
• Disk Error: If HDD is not detected properly.
• Video Loss: If camera is not detected properly.
Enable Select Enable to issue a notification when the event type occurs.
AlarmOut If an alarm device is connected, check the box to make the device sound the alarm when
the event occurs.
Dwell Time Select the alarm duration (10S/20S/40S/60S).
Show
Message
Check the box to display a message on the screen when the event occurs.
Buzzer Set the buzzer duration when the event occurs (Off/10 S/20 S/40 S/60 S).
To disable buzzer, select Off.
Send Email Check to enable email alarm notification. If the function is enabled, the system will send
the alarm to the specified email address. See
“4.4.3 Email Settings” on page 55 .
4
After all settings are complete, click Apply.
5
A warning message appears, click OK to confirm.
6
When data saving is complete, click OK.