KGUARD Security SHA28 - Manual (Page 45)

ENGLISH
Chapter 4: Using the DVR
DVR User’s Manual
45
5
After all settings are complete, click Apply.
6
When data saving is complete, click OK.
Note:
The PTZ camera can only be activated when a connected channel with the PTZ camera is selected.
4.4.4 Setting Up Mobile Devices
To remotely access the DVR via mobile devices, be sure that the DVR network connection is properly configured before
proceeding with the mobile devices setup.
To configure the mobile devices, do the following:
1
In preview mode, right-click on the mouse to display the Pop-up menu.
2
Select Main Menu > DEVICE > MOBILE.
3
Set the User Name and User Password which you have set for the DVR (see “3.3.2 Virtual Keyboard” on page 21
for details on using the virtual keyboard).
4
Enter the Server Port. The setting range is between 1024 and 65535.
Note:
• The user name and password cannot be left empty.
• To forward a server port to the router, see
“4.2.4 Port Forwarding” on page 35 .
5
After all settings are complete, click Apply.
6
When data saving is complete, click OK.