3 video and audio settings, Setting the video output, Setting the volume – KGUARD Security SHA28 User Manual
Page 51: Setting the video output setting the volume, E 51
ENGLISH
Chapter 4: Using the DVR
DVR User’s Manual
51
4.5.3 Video and Audio Settings
The VIDEO menu allows you to configure the video and audio output settings, including the setting of Privacy Zone
which is used to hide an area on the screen from being viewed.
Setting the Video Output
1
In preview mode, right-click on the mouse to display the Pop-up menu.
2
Select Main Menu > SYSTEM > VIDEO.
3
Modify the necessary settings.
Menu Item
Description
Video System Select the video system used in your location (NTSC/PAL).
VGA
Resolution
Select the output resolution.
OSD Output
Select where you want to display the OSD menu when multiple monitors are connected
to the DVR (BNC Out, VGA, or Auto).
Rotate Time
Set the interval time in seconds when changing screen display in Auto Switch mode. See
“3.4.5 Auto Switch View” on page 26
4
Click Edit.
Setting the Volume
1
In preview mode, right-click on the mouse to display the Pop-up menu.
2
Select Main Menu > SYSTEM > VIDEO.
3
Click Volume.
4
Drag the slider bar to adjust the output volume.
5
Click X to close the volume bar.
6
Click Apply to save volume settings.
7
When data saving is complete, click OK.