KGUARD Security OT1601 - Manual (Page 54)

ENGLISH
Chapter 4: Using the DVR
54
DVR User’s Manual
4
On Enable, select Enable to allow the system to synchronize with an NTP server.
5
On Server Address, select the NTP server.
6
Select the Time Zone in your location.
7
Click Apply to save the settings.
Setting Daylight Saving Time
1
In preview mode, right-click on the mouse to display the Pop-up menu.
2
Select Main Menu > SYSTEM.
3
In DST, click DST Setup.
4
In Daylight Saving Time, select Enable.
5
In Time Offset, select the amount of time to offset for DST.
6
Select the Daylight Saving Time Mode.
• Week: Enter the Start Time and End Time information by selecting the starting/ending month, week, day, and
entering the starting/ending time.
• Date: Enter the Start Time and End Time information by entering the starting/ending date and time.