KGUARD Security OT1601 - Manual (Page 88)

ENGLISH
Chapter 5: KGUARD Web Client
88
DVR User’s Manual
4
Set the Protocol, Baudrate, Data Bits, Stop Bits, and Parity.
Note:
Check the PTZ camera specifications for the correct settings.
5
Enable or disable Cruise.
6
Set the Address.
7
After all settings are complete, click Save.
« TIP »
• To apply the same recording settings to other channels, click Copy. See “Copying Settings To Other Channels”
on page 72 .
• To cancel any modifications and retain the existing settings, click Refresh.
5.5.7 Managing System Settings
On the System Setup menu, you can modify the time zone and view the language used on the DVR and its signal
source.
General Setup
1
On the Main Menu, click Remote Setting.
2
On the left panel, click System > General. The General screen appears.