Compaq 1500 - Manual (Page 118)

5–26 Maintenance and Service Guide
Removal and Replacement Procedures
6. Remove the display video cable 1 from the routing channel
in the heat spreader (Figure 5-21).
7. Lift the right side of the heat spreader until it rests at
an angle 2.
8. Slide the heat spreader to the right at an angle 3 and remove
the heat spreader from the base enclosure.
Figure 5-21. Removing the Heat Spreader
Reverse the preceding procedures to install the heat spreader.
279372-001.book Page 26 Friday, July 19, 2002 11:50 AM