Compaq 1500 - Manual (Page 128)

5–36 Maintenance and Service Guide
Removal and Replacement Procedures
8. Lift the front edge of the palm rest and swing it up and
back 1 until it rests on the top cover (Figure 5-28).
9. Release the ZIF connector to which the diskette drive cable
is attached 2 and disconnect the diskette drive cable 3 from
the system board.
10. Release the ZIF connector to which the system board-
to-TouchButton board cable is attached 4 and disconnect
the cable 5 from the TouchButton board.
Figure 5-28. Removing the Palm Rest
279372-001.book Page 36 Friday, July 19, 2002 11:50 AM