LABEC FXP16M - Manual (Page 8)

LABORATORY EQUIPMENT PTY LTD
THE FOLLOWING GUIDELINES SHOULD ALWAYS BE
FOLLOWED IN MAINTAINING THE RELIABILITY AND
EFFICIENCY OF THE ULTRASONIC CLEANING UNIT AND
THE ULTRASONIC ASSISTANT.
* WHEN LOCATING THE CLEANER ALWAYS KEEP THE UNIT AT A
SAFE DISTANCE FROM SINKS OR WATER OUTLETS TO ELIMINATE
ELECTRICAL BREAKDOWN.
*
ALWAYS DRAIN THE BASKET FULLY OF FLUID BEFORE
LEAVING THE CLEANING CHAMBER.
*
TAKE CARE WHEN REFILLING THE CLEANER AS NOT TO
ALLOW ANY EXCESS SPILLAGE OR SPLASHING OF FLUID
ONTO MAINS POWER OUTLET.
*
UNWANTED RESIDUE LEFT AFTER CLEANING PROCESS
SHOULD ALWAYS BE RINSED OR WIPED CLEAN FROM
THE INTERNAL TANK TO AVOID CORROSION OF TANK
SURFACE.
*
THE DRAINAGE OF FLUID THROUGH THE OUTLET
VALVE SHOULD ALWAYS BE WELL CLEAR OF THE
TIMER CONTROL AND MAINS PLUG CONNECTION.
* THE OPERATOR SHOULD ALWAYS BE AWARE THAT IT ONLY
TAKES A SMALL AMOUNT OF MOISTURE CONTAMINATION ON
THE POWER CONNECTIONS TO CAUSE ELECTRICAL BREAKDOWN.