LABEC Z-L-450 - Manual (Page 4)

Catalogue
1 st Terms of safety using 4
1.1 Notes of Operation 5
2
nd Introduction of Low-speed table-top centrifuge 5
2.1 Overview 5
2.2 Introduction of Equipment 6
2.3 Security structure 7
2.4 Requirement of placing the machine 8
3
rd Preparation before using 8
3.1 Transportation and installation 8
3.2 Choose suitable place to place 9
3.3 Put the machine at fixed place 9
3.4 Connect the power supply in correct way 9
4th Operating instructions
10
4.1 Introduction of control panel and display interface 10
4.2 Boot 10
4.3 Open the door 11
4.4 Close the door 11
4.5 Installation of the rotor 11
4.6 calculation of rotor load 12
4.7 Filling of sample in the centrifuge 12
4.8 Use the rotor in safe way 13
4.9 Example of operating of parameter setting 13
5th Items of maintenance
15
5.1 Cleansing and purification 15
5.2 Maintenance responsible by Our company 16
6th Fault Handling
18
6.1 Open the cover in case of emergencies 18
6.2 Alarm Information of fault 18
7th Packing list
22
8th Certificate
23
Appendix 1 Type of rotor and technical parameters
24
Appendix 2 Technical Data 25