Leapers 2.6 ITA Red/Green CQB Micro Dot with Integral QD Mount (SCP-DS3026W) - Manual (Page 12)

10
Fig 3
Fig 2
T
o un-l
o
c
k
To
un
- l o c k
3. Turn the Cam Lever
toward its unlocked
position as shown in
Fig 2. Place the QD
mount on the Picatinny
Rail at the desired
position. Make sure to
seat the cross bolt into
a selected slot. Note:
For SCP-DS3068W, turn
the locking levers toward
opposite directions to
unlock as shown in Fig 3.
4. Turn the Cam Lever
toward the locking position to begin locking the
QD mount on the rail, but do not complete the
locking motion, leaving some travel distance to
allow for adjustment.
T o un-
l oc
k