Levana Ovia Manual - Manual (Page 10)

mylevana.com
SETUP
10
Install the battery
Connecting Power to the Monitor / Charging Battery
1. Connect the small end of power adapter marked MONITOR into the DC input
on the side of the monitor as shown in the diagram. Connect the other end of the
adapter into an available wall outlet. For safety reasons, ONLY use the adapters
included in the package.
2. Press and hold the POWER button on the top of the monitor to turn the monitor ON.
3. The icon in the top right corner of the main screen will show you the battery power status.
4. The LED Ring on the front of the monitor also indicates the battery power status.
SOLID BLUE = BATTERY FULLY CHARGED SLOW FLASHING BLUE = BATTERY CHARGING
QUICK FLASHING BLUE = BATTERY LOW FLASHING PINK = PAIRING UNSUCCESSFUL
EMPTY CHARGING FULL
LED Ring
DC Input
5.9V
, 1A