LEWITT DGT 650 - Manual (Page 11)

11
Cardioid Mode selected
// Gain L R will be lit. Rotate the jog dial to change the gain.
Singer/Songwriter Mode selected // Gain L will be lit first. This lets you set the gain for the left channel
– in this mode, it’s the cardioid microphone. Press the jog dial; Gain R will now be lit. This lets you change
the gain of the right channel – in this mode, it’s the line input.
Stereo Line Mode selected // Gain L R will be lit first. This lets you change the left and right-channel gain
settings together. Press the jog dial again; Gain L will be lit. This lets you adjust the gain of the left input
separately. Press the jog dial again to change the gain of the right channel separately.
Recording Mode // The selected recording mode symbol is lit. Rotate the jog dial to change the recording
mode. Press the jog dial to switch to the next setting.
Monitoring Mode // Use the jog dial to blend between tape return monitoring and direct monitoring . The
LED graph shows the mixture of the two modes. Press the jog dial to switch to the next option.
high-pass Filter // Set the high-pass with the jog dial. Available settings are: flat, 80Hz@12dB/Oct and
160Hz@12dB/Oct.
Pre-Attenuation // Set the pre-attenuation
by rotating the jog dial the options are 0dB, -10dB and -20dB.