LEWITT DGT 650 - Manual (Page 8)

8
// User Interface
Input indicator // Displays active recording mode
a // Stereo Mode
b // Cardioid Mode
c // Singer/Songwriter Mode
d // Stereo Line-In Mode
Monitoring modes // Mix the output signal of your device
with the input signal of your microphone – simply put: hear the
playback and your voice at the same time ...
Return
// Monitor the output of your PC, Mac or iOS device
Direct // Monitor the input of the DGT 650 without any latency
High-pass filter // Use these filters to get rid of unwanted
low frequencies like wind, footsteps, structure-borne noise, ...
The high-pass filters at 80Hz or 160Hz affect the microphone
and line input at 12dB per octave.
Pre-Attenuation // For loud signals to prevent clipping.
0/-10/-20 dB of pre-attenuation affect the microphone only.
a b c d