Lippert Components Sofa Slideout System - Manual (Page 9)

3. Disconnect the motor wire.
Note: Only one lead needs to be disconnected.
CAUTION – If neither lead is disconnected from
battery, actuating the system may push an
electrical charge back through the motor and
damage the motor or other electrical
components.
Fig. 7
4. Using a 5/8 in wrench or socket/ratchet combination, rotate the
shaft in the counterclockwise to retract slideout room.
Fig. 8
9
WARNING!
The gears can be stripped out if the room is manually retracted/extended to it’s
fullest extent and the operator continues to rotate manual override.
Any damage due to misuse of the Manual Override feature will disqualify any and all
claims to the Limited Warranty.