Liberty Garden 880 User Manual
Page 3
Advertising
1. Attach rubber feet
(H) to the bottom frame (B).
Insert bolts into bottom of frame. Attach nuts and tighten.
See Figure 1.
2. Turn frame
(B) over and attach U-bushing (metal side facing out) (J) to frame using two
U-bushing bolts
(R) and nuts. (S) Hand tighten only.
3. Spool Assembly: Insert brass swivel
(L) thru U-bushing (J) and screw into galvanized tee on the
spool
(A). Tighten using a wrench. See Figure 3. DO NOT overtighten, this could damage the
threads. Be sure to use Teflon / Plumbers’s tape on threads.
4. Turn spool
(A) around and slide plastic
spacer washer
(O), spring (I) and another
plastic spacer washer
(O) over the pipe.
See Figure 4.
3
CART ASSEMBLY
FIGURE 1
FIGURE 3
FIGURE 4
FIGURE 2
H
B
J
L
R
R
S
J
B
A
A
I
S
O
O
Advertising