Longshine GFT150 Ver.1.0 - Manual (Page 36)

PS960GLE/ PS965GME Mainboard
32
DRAM RAS# to CAS# Delay
It allows you to insert a delay between the RAS (Row Address Strobe) and CAS (Column Address
Strobe) signals. This delay occurs when the SDRAM is written to, read from or refreshed.
Reducing the delay improves the performance of the SDRAM.
Setting: Auto (Default), 2, 3, 4, 5, 6.
DRAM RAS# Precharge
It sets the number of cycles required for the RAS to accumulate its charge before the SDRAM
refreshes.
Setting: Auto (Default), 2, 3, 4, 5, 6.
Precharge Delay (tRAS)
Setting: Auto (Default), 8 - 15.
System Memory Frequency
It allows you to set the frequency of the DRAM memory
Setting: By SPD (Default), 533MHz, 667MHz.
System BIOS Cacheable
The setting of Enabled allows caching of the system BIOS ROM at F000hFFFFFh for better
system performance. However, if any program writes to this memory area, a system error may
result.
Setting: Disabled, Enabled (Default).