Longshine GFT150 Ver.1.0 - Manual (Page 47)

PS960GLE/ PS965GME Mainboard
43
Soft-Off by PWR-BTTN
It defines the power-off mode when using an ATX power supply.
In the Instant Off mode, it allows powering off immediately upon pressing the power button.
In the Delay 4 Sec mode, the system powers off when the power button is pressed for more than
4 seconds or enters the suspend mode when pressed for less than 4 seconds.
Setting: Instant-off (Default), Delay 4 Sec. .
Power On by Ring
It enables or disables the power on of the system through the modem connected or LAN.
Setting: Disabled (Default), Enabled.
Resume by Alarm
It enables or disables the resumption of the system operation. When enabled, the user is allowed
to set the Date and Time.
Setting: Disabled (Default), Enabled.
Reload Global Timer Events
The HDD and PCI PIRQ are I/O events that can prevent the system from entering a power saving
mode or can awaken the system from such a mode. When an I/O device wants to gain the
attention of the operating system, it signals this by causing an IRQ to occur. When the operating
system is ready to respond to the request, it interrupts itself and performs the service.