Luma Comfort IM200SS Manual - Manual (Page 6)

6
www.LumaComfort.com
S
ET
U
P
I
NSTRUCTIONS
1. Remove the ice maker’s exterior and interior packaging, and remove any
tape from the unit. Do not discard the unit’s box. Keep it for future storage
purposes.
2. Check to make sure the ice scoop and other components shown in the list
of main parts are included.
3. Clean the interior with lukewarm water and a soft cloth.
4. Find a location for your ice maker that is positioned away from direct
sunlight and other heat sources such as stoves, furnaces and radiators.
5. Allow the unit’s refrigerant to settle for one hour before plugging in the ice
maker for the first time. Also ensure that the ice maker is positioned so
that the plug is fully accessible.
Important: After unpacking your ice maker, it must rest in an
upright position for at least one hour before you plug it in or the
compressor may be damaged, shortening the life span of the
unit.
O
PERATING
I
NSTRUCTIONS
C
ONTROL
P
ANEL
A. ADD WATER (Tank
Empty) indicator
B. FULL ICE indicator
C. Power Indicator
D. ON/OFF Button