Mastersound PF 100 Limited - Manual (Page 10)

M a s t e r E m o t i o n 10
Last recommendations
Any change of interconnectors (cables, etc...) must be done with the amplifier switched in
the off position.
Never move or remove the amplifier when tubes are still hot.
Never install or remove tubes when the amplifier is still switched in the on position.
Maintenance of the amplifier
Use gently a wet and soft cloth (buckskin) to clean Your amplifier and dry immediately.
Never clean Your amplifier when hot or running.
Do not forget to take out the plugs before starting to clean the amplifier.
The contents of the boxes
• 2 amplifiers marked Unit A and Unit B
• a complete set of select tubes
• 2 feed-line cables
• the warranty
• 1 user’s handbook