Mastersound PF 100 Limited - Manual (Page 8)

M a s t e r E m o t i o n 8
Check list
To be done by the dealer:
set up the amplifier with the right impedance 4/8 ohm suitable for the speakers and
select the right main line according to country.
The above checks are to be made inside the monoblock and shall be carried out only by
qualified staff.
To be done by the Purchaser:
• Place the amplifier on a solid and flat surface.
• Place the tubes in their correct socket positions.
• Connect the speakers to the speaker connectors joining the positive cable (the red one or
the one with the plus sign) to the red plug and the negative cable (the black one or the one
with the minus sign) to the black plug.
• Connect the pre-amplifier.
Connect the amplifier making sure that the voltage in Your main line is the same as
indicated on the back of the unit and corresponds to Your country’s electrical current