MF Digital OptiEC - Manual (Page 8)

Adjusting the MF Digital OptiEC Printer Driver Settings
Printer Spooling
It is important to disable printer spooling on the MF
Digital OptiEC printer. To do so, please follow the
steps below:
1. Go to Start-> Settings -> Printers
2. Right-click on the MF Digital OptiEC
printer in the Printers Folder
3. Go to Properties
4. Go to the Advanced Tab
5. For the Scribe Program to use the printer
effectively, please match the settings of
your printer driver to the example on the
right-side of this page.
6. To save settings, Click Apply and OK to
exit.
***NOTE: Any changes made to the printer
driver settings, require a NEW PRN file to be
made. If you change one of the settings, be sure
to create a NEW PRN file.***
Page 8