MF Digital Vantage (Rev: 06/01/02) - Manual (Page 55)

Vantage Series
Operator’s Guide
Document Revision: 110102
Page 54
(fig. 4)
(fig. 5)
(fig. 6)
6. If you pressed the Add button you will
be prompted to select label files.
Highlight the label files you would
like to use and press open.
7. Once the label files are added you can
arrange them to coincide with the
masters being used in the relay mode
job.
8. Select a priority and give your job a
name.
9. Click “Finish” and the Vantage will
run the job.