MF Digital Vantage (Rev: 06/01/02) - Manual (Page 67)

Vantage Series
Operator’s Guide
Document Revision: 110102
Page 66
requested discs, the number of successful discs produced, the number of
failed discs produced, the immediate status of the job (copying images,
loading discs, copying discs, unloading discs, etc.) and the progress.
The lower pane is the Finished jobs window that lists all the jobs completed
by the Vantage. Information displayed for each job includes its assigned Job
name, type of job, image path, the total number of requested CDs, the
number of successful discs produced, the number of failed discs produced,
and the status.
The Production Process
During production the blank discs will be loaded one at a time from the
input spindle into the recorders and/or printer. Upon successful completion
the discs will be unloaded onto the output spindle if the “print” general
option is not selected. If selected, the discs will go to the printer before
being placed on the output spindle. This process will continue until the job
is complete and the Vantage will then advance to produce the next job in
the queue according to its priority.
However, if the input spindle empties before the job is complete the screen
will now read:
To continue producing the job, place additional blank discs onto the input
spindle and click the Yes button. To stop the job click the No button and the
remainder of the job will be aborted. The Vantage will then advance to
produce the next job in the queue according to its priority.
Note: Any discs dropped in the reject area have failed to record
properly and should not be used. Be sure to remove rejected
discs periodically during operation. Drive rejects are placed
in front of the drives. Print rejects are placed in front of the
printer.