Compaq 230934-002 - Manual (Page 92)

MSA Fabric Switch 6 Management Utility
Modular SAN Array Fabric Switch 6 User Guide 3-57
COMPAQ CONFIDENTIAL
Writer: Kim L. Miller File Name: d-ch3 MSA Fabric Switch 6 Management Utility.doc
Codename: Millebourne Part Number: 230934-002 Last Saved On: 7/17/02 7:52 AM
2. To create a new Zone Set:
a. In the Zone Sets column of the Zoning Configuration screen, click Add.
b. Enter the name for the Zone Set.
c. Click OK.
3. To create a new Zone Set by modifying an existing Zone Set:
a. In the Zone Sets column of the Zoning Configuration screen, select the
existing Zone Set and click Edit.
b. In the Edit window, change the name of the Zone Set to the new name.
c. Click OK.
Creating Zones
To create new Zones:
1. In the Zones column of the Zoning Configuration screen, click Add.
2. Enter the name for the Zone.
3. Click OK.
Creating Zone Members
To enter the devices:
1. In the Zone Members column of the Zoning Configuration screen, click Add.
2. Enter the name of the zone member
3. Select the WWPN from the port number list.
4. Enter the WWPN name, or if the device is already connected to the switch, select
the name from the dropdown menu.
5. Click OK.
6. Repeat these steps for each additional Zone Member.