Mojave Audio MA-201fet - Manual (Page 2)

INTRODUCTION
Congratulations on your purchase of a Mojave Audio MA-201fet Solid State Capacitor
Microphone! Your MA-201fet was carefully designed and constructed using only the finest
materials. The MA-201fet microphone is capable of delivering superb performance and, with
minimal care, will do so for many years. Your MA-201fet was thoroughly tested and given a
factory burn-in prior to shipment.
The MA-201fet is guaranteed to perform as specified and is suitable for recording even the most
demanding music, provided that the microphone is used sensibly.
For optimum performance from your new microphone, please read this manual thoroughly and
become familiar with the proper use of the MA-201fet.
UNPACKING AND INSPECTION
Carefully unpack your MA-201fet microphone and verify that all of the components included
with the microphone are accounted for. Do not discard any packing materials! If anything is
missing or damaged, contact your dealer or Mojave Audio immediately.
Items included with the MA-201fet are:
1. MA-201fet microphone inside an aluminum style carrying case
2. MA-201fet shock mount and European adapter (fitted to shock mount)
Verify that the serial number of your MA-201fet matches correctly with the one on your receipt.
The MA-201fet serial number can be found inside the microphone housing. To access, simply
unscrew the bottom ring and slide the body off. When corresponding with Mojave Audio about
your microphone or when service is required, we will need to know the serial number, so keep it
handy.