Mojave Audio MA-201fet - Manual (Page 4)

4. When plugging in the three-pin XLR cable between the
microphone and mic preamp, orient
the plug correctly and plug the connectors in gently. Rough handling or hurry-up plug-ins can
result in bent pins.
5. Do not expose the microphone to dusty, smoky or humid environments.
6. Do not attempt repairs unless you are a qualified technician. There are no user serviceable
parts in the MA-201fet.
7. Use a soft, lint free cloth to remove fingerprints and other blemishes on the microphone body.
Never use chemicals, solvents or detergents.
TECHNICAL SPECIFICATIONS
TRANSDUCER TYPE:
Externally polarized pressure
gradient capacitor
DIAPHRAM:
1-inch diameter, gold sputtered
DIAPHRAM THINKNESS:
3-micron
POLAR PATTERN:
Cardioid
FREQUENCY RESPONSE:
20 Hz-20kHz, + 3dB
SENSITIVITY:
-39 dB re. 1V/pa
MAXIMUM SPL:
125 dB
DISTORTION:
<1% @120dB SPL, <3% @ 134dB SPL
SELF NOISE:
14dB nominal, not to exceed 16dB (A weighted)
IMPEDANCE:
550 ohms, transformer balanced (Jensen)
POWERING:
48VDC phantom power; current .68mA.
DIMENSIONS AND WEIGHT:
Carrying case with microphone, shock mount:
10” x 9” x 4.5”, 4 lbs.
Microphone: 7 5/8” x 2”, 1 lb.