MOOER VEM Box - Manual (Page 10)

09
Expression Pedal
Volume Control
If the [EXP. PEDAL] LED is not lighted up, the expression pedal
will be a volume pedal for controlling the master level of VEM Box.
Effect Control
If the [EXP. PEDAL] LED is lighted up, the expression pedal will be
an expression pedal for controlling the effect’s parameter which
was set up in PEDAL setting.
Control Assign
Set the Module Selector to [PEDAL], the LED display will show the
controlling object of the expression pedal.
There are 9 kinds of parameter can be controlled by the pedal,
LED will show the type of parameter in control:
01
02
03
Control Target LED Display Control Parameter
Wah Central Frequency
Transducer Gain / Cutoff
Modulation Rate
Modulation Depth Depth
Rate / Frequency
Harmony Range
Delay Time Time
Pitch
Delay Feedback Feedback
Rotate [VALUE] knob to choose one kind of controlling target, then
the expression pedal will work with the corresponding parameter.
Reverb Level Reverb Level
Vocoder Gender Gender
Note: There will be a symbol behind the effect parameter which can be
controlled by the pedal (refer to Effect Explanation for detail).
Note: If the effect module of the chosen target was not turned on, the pedal
will be of no effect.
Note: Pedal setting can be stored in patch.
Note: The expression pedal will be effective in EDIT mode.