MUTEC MC-1.1+ - Manual (Page 7)

> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 88
\
B E D I E N E L E M E N T E B E D I E N E L E M E N T E B E D I E N E L E M E N T E
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
Manual SDs-01 D 3.2.2003 17:45 Uhr Seite 3
INTRODUCTION
Thank you very much for purchasing the MC-1.1+, Digital Audio Format
Converter, from MUTEC!
General Function Description
The MC-1.1+ is a multifunctional, high-performance digital audio format
converter for AES3, AES3id and S/P-DIF. Using latest digital audio circuit-
ries and low-jitter PLLs, the MC-1.1+ enables to improve and re-stabilize
incoming digital audio signals, while converting and splitting those to the
corresponding outputs. all audio formats can be processed up to 192.0kHz.
The MC-1.1+ helps you to interconnect devices which use different digital
audio formats and incompatible interfaces. The format conversion process
does not only the necessary electrical conversion but also a format conversi-
on of the reference signals in compliance with the specifications which are
standardized by the Audio Engineering Society (AES) and the International
Electrotechnical Commision (IEC).
Dual low-jitter PLL circuitries allow to run two signal paths independently for
realtime bidirectional format conversions. Additionally, the MC-1.1+ provides
two outputs for each digital audio format which enables the use as signal
splitter or distribution amplifier.
Various uni- and bidirectional operation modes, 4-way signal splitting,
SCMS processing or signal status detection make the use of the MC-1.1+
possible in a wide range of applications.
Features
AES/EBU3, AES3/EBUid and S/P-DIF optical/coaxial interfaces in one box.
Uni- and bidirectional format conversions from 32.0kHz to 192.0kHz bet-
ween AES3/11 and S/P-DIF.
Simultaneous format conversion to all output formats while allowing
the original signal to pass through.
Signal improvement by low-jitter audio PLLs.
AES3/11, AES3id/11id and S/P-DIF optical/coaxial signal splitting.
SCMS processing and status analyzing.
NONE-PCM and DTS bitstream detections.
Easy configurable.
User‘s settings will be stored after switching-off.
Rack space saving 1/2 19“ case allows for mounting two devices in one
rack unit.
Built-in international power supply.
Applications
Interconnection of consumer and professional digital audio devices.
Realtime bi-directional signal transfer and format conversion between
send/returns of digital mixing consoles and effect processors.
Uni- or bi-directional interconnection of computer-based sound cards
with professional digital audio equipment.
AES3/AES11 and S/P-DIF signal splitting and distribution.
Digital audio signal refreshing.
SCMS coding of digial audio productions to protect those against illegal
copying.
S/P-DIF optical/coaxial status analyzing.
7
Boxes which contain a triangle with
an exclamation mark inside should
be read carefully! These include
additional information which are of major
importance for the functional descriptions
in the text column.
!
The grey boxes contain supplementary
informationen for the corresponding
sections in the text columns. The content of
the individual box refers to the description
in the text column beside the box.
Register your MUTEC Product
for Warranty and Support!
We ask you to be so kind to register
your MUTEC product through our website
immediately after purchasing. This ensures
full warranty services over a period of two
years after purchasing the product. More-
over, for all registered products we offer to
our customers technical support. We also
will inform you about product updates and
new products which may of interest for you
(on voluntary base, of course).
Please regsiter your product at:
www.MUTEC-net.com
> SERVICES, > MUTEC Product Registration
!