Mytek Digital Stereo 96 DAC (VER.5/jan 2006) - Manual (Page 4)

T1 Amp 20mm
Slow Blow fuse
115VAC/230VAC
power switch
Internal input gain trimpots:
Overall L/R signal gain- turn it down for unbalanced consumer -10dBV
sources- use sinewave alignment procedure described further if necessary.
Default is typical +4dB output level.
Internal analog output jumpers:
JP2, JP4 - insert front stereo potentiometer as the output XLR volume control-
default- used typically when power amp or powered speakers are connected to
output. Turn it down for unbalanced consumer -10dBV sources.
JP1, JP3 - overall signal gain- turn it down for unbalanced consumer -10dBV
sources- use sinewave alignment procedure described further if necessary.
Stereo96DAC internal trimpots and jumper assignments
(remove top cover to access)
Stereo96DAC internal trimpots and jumper assignments
(remove top cover to access)
5 6