Mytek Digital Stereo 96 DAC (VER.5/jan 2006) - Manual (Page 8)

Specifications
Conversion: 2-channel, 24bit, PCM 192-kHz D-to-A
conversion in SuperLock(tm) mode ( 96-kHz D-
to-A conversion in input sync mode when digital
input sync is used)
All sample rates playback with 100-kHz analog
bandwidth in SuperLock(tm) mode
Resolution: 24 bit (16-24 bit input accepted)
Dynamic Range: 120dB A-weighted, 117dB Total
THD+Noise: -107dB (<0.0005%)
Internal clock jitter: <10picoseconds
Analog Outputs: +4dBm balanced or unbalanced , 75 Ohm,
trimpots and potentiometer for level control.
For variable or preset output level controls,
switch selectable with high performance
conductive plastic attenuator (for direct conn. to
power amp or speaker)
Digital Inputs: Hi-speed (25-200kHz) AES/EBU, SPDIF,
Digital input source-selection switch
Jitter . <10psec Total jitter immunity via Superlock™
technology
Headphone Amp Hi End, High Current Class AB Amplifier
Mains: 100/115V-220/240V 50/60Hz switchable
Dimensions: 1/3 rack space wide x 1U high x 8” deep
(5.5”x 1.6”x 8”)
Weight: 4 pounds
Warranty
This Stereo96DAC digital audio converter is warranted by Mytek to the
original purchaser against defects in workmanship and materials used in
manufacture for a period of one year from the date of purchase. Faults due
to customer misuse, unauthorized modifications or accidents are not
covered by this warranty.
No other warranty is expressed or implied.
Any faulty unit should be sent, shipping prepaid, to the manufacturer
service center. Prior to shipping the client should obtain from Mytek an
RMA# for warranty services. Units sent without RMA# will not be
accepted.
Mytek extends affordable repair service for all units manufactured to date
that are not covered by this Warranty.
13 14