Neuspeed 25.02.19.4 User Manual
Neuspeed For the car
19mm ADJUSTABLE REAR SWAY BAR
1996 – 2001 AUDI A4 / S4 QUATTRO
PART # 25.02.19.4
INSTALLATION INSTRUCTIONS
PART LIST:
1
–
SWAY
BAR
1
–
RIGHT
HAND
BRACE
2 – POLYURETHANE BUSHINGS
2 – M10 NYLOC NUTS
1 – LEFT HAND SUPPORT BRACKET
10 – M8 FLANGE BOLT
1 – RIGHT HAND SUPPORT BRACKET
10 – M8 NYLOC NUT
1 – LEFT HAND BRACE
6
–
M8
WASHER
TOOLS REQ:
1
–
RATCHET
1
–
17mm
WRENCH
1 – 12mm SOCKET
1 – 13mm WRENCH
1 – 13mm SOCKET
Left hand (driver’s) side shown.
In order to achieve the correct fit, please follow the following sequence:
1. Raise rear of vehicle and support with jack stands under lifting points. NEVER WORK UNDER A
VEHICLE SUPPORTED ONLY WITH A JACK.
2. Remove factory sway bar: Spray WD40 (or equivalent) on ball joint stud at sway bar end links. Use 17mm
wrench to remove end link lock nut.
NEUSPEED • 3300 Corte Malpaso • Camarillo, CA 93012 • 805.388.7171 • 805.388.0030 FAX
Visit us on the web…http://www.neuspeed.com & http://www.apsoutlet.com