Neuspeed 62.10.71 - Manual (Page 2)

NEUSPEED • 3300 Corte Malpaso • Camarillo, CA 93012 • 805.388.7171 • 805.388.0030 FAX
Visit us on the web…http://www.neuspeed.com
5. Remove drive belt by installing a M8 X 1.25 x
80mm bolt in threaded bore on belt tensioner
assembly. Rotate bolt clockwise until belt is loose
enough for removal. Mark running direction on belt
and remove belt.
6. Hold outer edge of alternator pulley with large
channel lock pliers or equivalent. Using a 24mm
socket, loosen alternator nut and remove pulley.
7. Remove bolts securing power steering pump
pulley and remove pulley.
8. Using VW tool Counter Holder (T10069) and 27
mm socket undo and remove bolt securing crankshaft
pulley.
9. Remove crankshaft bolt and crankshaft pulley.
10. Using a grinder or file remove ¼” of material
from corner of crank seal housing. Test fit supplied
crankshaft pulley and check to see that there is at
least 1/8” of clearance between housing and pulley.
Continue to remove material until clearance is
achieved.