Nixeus NX-VUE30 - Manual (Page 13)

Dynamic Contrast Ratio (DCR) can also be adjusted in the BRIGHTNESS Sub-MENU.
1) Use the UP/DOWN buttons to navigate to DCR and press the MENU button.
2) Using the VOL+/VOL- buttons you can turn DCR to ON or OFF. Pressing the AUTO button will exit
DCR.Please note if DCR is turned ON, you cannot adjust the BRIGHTNESS and CONTRAST settings.
You must adjust your BRIGHTNESS and CONTRAST settings prior to turning ON DCR.
NOTE: For professional calibration, DCR must always be set to OFF and the ECO settings must be set to
STANDARD to allow access or adjustments to BRIGHTNESS and CONTRAST settings in the
BRIGHTNESS Sub-Menu.
13