Nixeus NX-VUE30 - Manual (Page 16)

Color Temperature Calibration in COLOR TEMP Sub-Menu:
NOTE: For accurate color calibration, we recommend using a hardware colorimeter
1) In the COLOR TEMP Sub-Menu, use the VOL+/VOL- button to select the “USER” preference and press
the MENU button.
2) Use the UP/DOWN button to select which color temperature to customize and press the MENU button to
highlight the progress bar.
3) Next, use the VOL+/VOL- to adjust the desired settings of the color’s temperature. Pressing the AUTO but-
ton will allow you to exist out of the color’s progress bar. You can next use the UP/DOWN button to go to the
next color and pressing the MENU button will allow you to access the color’s progress bar to adjust that color’s
temperature settings. This step may be needed to repeated several times on each color to obtain the desired color
temperature settings when you are using a hardware colorimeter.
4) Once you have adjusted your desired color temperature settings, pressing the AUTO twice will exit the OSD
and apply the settings.
16