NORAC UC5-BC-RG13 - Manual (Page 21)

19
8 Module Installation
8.1 Control Module
1. Refer to Figure 1 and Figure 20.
2. Securely mount the control module (E01) inside the electrical box (Figure 21).
3. All cables that connect to the control module are located in the electrical box.
4. Connect the cable marked “NORAC C1” to the end of the control module with only one
Deutsch connector.
5. Connect the cables marked “NORAC C2” and “NORAC C3” to the control module
CANbus connectors.
Figure 20: Control Module Mounting
Figure 21: Control Module Location