Editing parameters, Cont.) – Novak Pit Wizard User Manual
Page 19
19
PIT WIZARD INSTRUCTION MANUAL
5. Press the {ENTER} button to register the parameter value. The
display will change back to the Neutral sub-screen:
21 Neutral
OPTIMUM SETTINGS: For optimum performance, your Cyclone
settings should be 1350
µ
S for Neutral, 1850
µ
S for Full Throttle,
and 1000
µ
S for Full Brake. This will display as 500
µ
S for full Throttle
and 350
µ
S for Full Brake in the Edit Profile mode.
6. Press the {UP} or {DOWN} buttons to display the next desired
adjustable parameter.
7. To display and modify Full Throttle (
sub-screen
22), Full Brake
(23), Deadband (24), Minimum Drive (26), and Drag Brake
Value (29), repeat Steps 3 through 5 .
Note: Deadband, Minimum Drive, and Drag Brake Value are entered as a
percentage to the nearest percent (1%) up to 50%.
(Display may appear to skip a value due to percentage rounding)
8. To display and modify Drive PWM Frequency (25), Brake PWM
Frequency (27), or Drag Brake Frequency (28), use Steps 3
through 5. There are 16 frequency values to choose from:
Select Freq
23.4KHz
EDITING PARAMETERS
(CONT.)
DEADBAND
T R I G G E R P O S I T I O N
N e u t r a l
F u l l
B r a k e
F u l l
T h r o t t l e
1 0
1 0
2 0
5 0
1 0 0
2 0
5 0
1 0 0
% FULL DRIVE
% FULL BRAKE
Figure 11:
Graphical display of the Full Throttle position shifted toward Neutral
for Drag Racing.