Novak Pit Wizard - Manual (Page 25)

25 PIT WIZARD INSTRUCTION MANUAL
TROUBLE-SHOOTING GUIDE
Experiencing problems?
Review the instructions and check the following:
• Must turn on transmitter and Cyclone, then connect Pit Wizard.
• If the display does not come on with the Pit Wizard’s switch in
the ON position or reads “BATTERY LOW”, replace batteries.
• If the display reads “COMM ERROR” when attempting to up-
load or download a Profile or monitor trigger position, press
and hold {MODE} button to return to start-up screen. Check the
D•LINK connection and condition of D•LINK pins and sockets.
• Pit Wizard’s D•LINK harness must make a good connection with
the Cyclone’s DataLink socket. Make sure socket is clean.
• All D•LINK harness pins must plug into the DataLink socket.
• Be sure D•LINK harness has all five pins (none bent or broken).
• Make sure all wiring is in good condition.
PRODUCT WARRANTY
PIT WIZARD WARRANTY: Novak Electronics, Inc. guarantees the Pit Wizard to be
free from defects in materials and workmanship for a period of 120 days from original
date of purchase (verified by dated, itemized sales receipt). Warranty does not cover in-
correct installation; components worn by use; splices to the Pit Wizard’s D•LINK
harness or; damage from excessive force when using ONE-TOUCH button, Minimum
Brake adjustment pot, or Pit Wizard’s ON/OFF switch; or tampering with internal
electronics; allowing water, moisture, or any other foreign material to enter the Pit
Wizard or get onto its PC board.
We reserve the right to modify warranty provisions without notice.
LIMITATION OF LIABILITY: Because Novak Electronics, Inc. has no control over
the connection and use of the Profile Software and Pit Wizard, no liability may be
assumed nor will be accepted for damage resulting from use of product. Every Pit
Wizard is thoroughly tested before leaving our facility and is, therefore, considered
operational. By the act of installing/connecting/operating the Profile Software and
Pit Wizard, user accepts all resulting liability. Under no circumstances, including
negligence, shall Novak Electronics, Inc. be liable for any incidental, special, or con-
sequential damages that result from use or inability to use Profile Software or Pit
Wizard. Novak’s total liability for all damages and losses shall not exceed the
product's original cost.